Repotec Powerline 85M Manual de usuario descargar pdf (Pagina 18)

8. T

ROUBLE

HOOTING

No Indicators are on

 Check mains power.

Power LED (top) is off but other LED indicators are on

 Possible adapter fault.

Power Line Communications LED (middle) is off

 This is normal for the first adapter installed. Its LED should come on when a

subsequent adapter is added to the network.

 Check that the Network Name has been correctly set. Adapters with different

Network Names will not communicate with each other. Check for a common

Network Name by plugging the adapters in adjacent or near adjacent power points.

If PLC LED indicator lights then a common Network Name has been set.

 If after confirming the Network Name the adapters are moved back into position but

the PLC LED remains off, then ensure that the adapters have been plugged directly

into a wall mounted power point. Failing resolution, it is possible that the mains

wiring at the required locations may be unsuitable, please try again using different

power points.

Ethernet LED (bottom) is off

 Check the Ethernet connection.

All LEDS are on or blinking but the attached devices are not communication.

 When all three LEDS being are on or blinking the PowerLine 85 network has been

established and operational. At this stage you will need to check the configuration of

the attached Ethernet devices to ensure that they are correctly configured.

Generally, if two pieces of Ethernet equipment can communication with each other

over standard Ethernet cabling then they are correctly configured for use in a

PowerLine 85 network.

1 2 ... 13 14 15 16 17 18

Sin comentarios

Repotec Powerline 85M Manual de usuario Pagina 18